beautypg.com

Clear order a (a-d), Diver order, Clear totals – Daktronics OmniSport 2000 Timing Console User Manual

Page 114

background image

96

Diving Mode Operation, Menus & Settings

MENU-EDI T
3-CLEAR ORDER A

MENU-EDI T
4-DI VER ORDER

MENU-EDI T
5-CLEAR TOTALS

When to use this:

If the existing event order needs to be completely erased from memory in the
OmniSport 2000 console so a new event order can be programmed from scratch.

Clear Order A (A-D)

This menu is used to clear one of the four dive orders
(A, B, C or D). The specific dive order to be cleared must be
selected before entering the menu. Refer to Selecting the
Order
in Section 7.5.





Press [YES] to clear the order. Press [NO] to exit the menu and leave the dive order as is.

When to use this:

Refer to Section 7.4 and Section 7.5.

Diver Order

This menu is used to edit the dive orders. The specific dive
order to be edited must be selected before entering the
menu. To do this, refer to Selecting the Order in Section 7.5.





Verify on the left LCD that the diver # and round are both set to “01”. Use the numeric
keypad to enter the three- or four-digit dive number and the [A], [B], [C], and [D] keys to
select the position. Press [ENTER] to accept the dive and position. Use the numeric keypad to
enter the DD for the dive selected. Press [ENTER] to accept the DD and increment the round
by one. Repeat this sequence to enter the dive, position, and DD for each additional round for
the selected diver.

Note: When in the Editing Order menu, press [←] to decrement the round by one,
[→] to increment the round by one, [↑] to decrement the diver by one, and [↓] to
increment the diver by one.


After the first diver’s dive list is entered, press [↓] to increment the diver by one. Press [←] as
many times as necessary to decrement the round to “01”. Now repeat the above instructions
for each diver’s dive list.

When to use this:

Refer to Entering Dive Lists in Section 7.4.

Clear Totals

This menu is used to clear the dive order scores. The specific
Dive order to be cleared must be selected before entering
the menu. To do this, refer to Selecting the Order in Section 7.5.

From Main Menu

– [2>[3]

From Main Menu

– [2>[4]

From Main Menu

– [2]>[↓]>[↓]

From Main Menu

– [2]>[↓]>[↓]>[↓]

From Main Menu

– [2]> []>[]

CLEAR OUT DI VE
ORDER-A Y/N?

MENU-EDI T
EDI TI NG ORDER A

This manual is related to the following products: