Daktronics OmniSport 2000 Timing Console - Manual (Page 163)

OmniSport 2000 Pro Synchronized Swimming Software 145
10.9 Configurations
Timer Configuration
Configuring the OmniSport 2000
Pro Synchronized Swimming
software is an important part of
managing events efficiently and
completely.
Once running the software, go to
Options > Timer Configurations.
The Timer window (Figure 173)
includes the following functions:
 Number of Lines tells the
software how many lines
are on the numeric
scoreboard.
 TOD Mode (time-of-day mode) sets how the time-of-day will be displayed.
 Multisport Display sets whether or not a multisport module is in use.
 Show Lead Swimmer sets whether or not the lead swimmer will be displayed.
 Printer Logging turns on/off printing from the timer thermal printer.
 Brightness adjusts the light intensity of the display.
 Meet Manager Port configures which protocol (Omni 2000, Omni 6000 or CTS)
communicates with the meet management software out of the J6 RESULTS PORT on
the OmniSport timer.
 RTD Port configures which protocol (RTD or CTS) will be transmitted out of the J5
RTD PORT on the OmniSport 2000 timer.
 Scoreboard Port configures which protocol (Multidrop or Multiline) will be
transmitted out of the OmniSport scoreboard outputs (J2 and J3).
Click Accept when finished.
Communications Setup
The Communication configuration sets which port interfaces the OmniSport 2000 timing
console to the OmniSport 2000 Pro computer. To enter this area, go to Options >
Communications > Setup.
Figure 173: Timer Configuration