Daktronics OmniSport 2000 Timing Console - Manual (Page 218)

200 Track Mode Menus & Settings
MENU-SCOREBOARD
2-RTD/MATRI X
MENU-RTD/MATRI X
1-# OF LI NES
MENU-RTD/MATRI X
2-FI N PAGE TI ME
MENU-RTD/MATRI X
3-RESULTS ORDER
15.7 Setup RTD/Matrix Scoreboard Menu
This menu sets the output data configuration matrix
displays.
Number of Lines
This menu sets the # of Lines of lane data being sent to the
matrix scoreboard. If the number of lanes on the track is
greater than the value set, the timer will automatically page
the information in place order. The default is 10.
Press the [0]-[9] keys to enter the number of lines appropriate to the facility’s display and
then press [ENTER] to save.
Note: If the number of lanes on the track is greater than the number of lines set, the timer
will automatically page the information in place order. Finish Times will page according
to the amount of time set in the Finish Page Time menu.
Finish Page Time
This menu configures how long (0 to 99 seconds) each page
of the Finish Times will hold on the display.
Press the [0]-[9] keys to enter the appropriate length of time the finish time will appear on the
display and then press [ENTER] to save. The default time is 5 seconds.
Results Order
This menu configures the console to display results in
either Lane Order or Place Order. If the number of lanes on
the track is greater than the number of lines configured for
the display, the timer will display the information in place
order regardless of this setting.
Use [←][→] to select either LANE or PLACE and then press [ENTER] to save.
When to use this:
 Select LANE to display the results in the order of the lane in which the athletes
finished.
 Select PLACE to display the results in the order of which the athletes placed.
From Main Menu – [4]>[2]>[2]>[1]
From Main Menu – [4]>[2]>[2]
From Main Menu – [4]>[2]>[2]>[2]
From Main Menu – [4]>[2]>[2]>[3]
# OF LI NES
LI NES= ^8
FI NI SH PAGE TI ME
TI ME: ^5*
RESULTS ORDER
ORDER-LANE * RESULTS ORDER
ORDER-PLACE*