Daktronics OmniSport 2000 Timing Console - Manual (Page 272)

220 Menu Navigation Shortcuts
4-4) COMM PORTS configures the communication ports
4-4-1) SCBD OUTPUTS sets the J2/J3 protocol (MULTIDROP, MULTILINE, or OMEGA)
4-4-2) RTD PORT sets the J5 protocol (RTD or CTS)
4-4-3) RESULTS PORT sets the J6 protocol (OMNI 2000, OMNI 6000, or CTS)
4-5) PRINTER configures printouts and the printer
4-5-1) RACE LOG sets whether to enable race logging (ON or OFF)
4-5-2) RESULTS sets order of printed race results (LANE or PLACE)
4-5-3) BACKUPS sets whether to print backup times (YES or NO)
4-5-4) SPLITS sets whether to print splits and what type (NONE, SUBTR, or CUMUL)
4-5-5) NUMBER OF COPIES sets the number of copies to print
4-5-6) INTENSITY sets printer intensity (contrast)
4-6) TIME OF DAY sets the day/month/year and hours/minutes/seconds
4-7) NETWORK configures the ETHERNET port
4-7-1) NETWORK ENABLE enables/disables the ETHERNET port (ON or OFF)
4-7-2) IP ADDRESS sets the IP Address
4-7-3) SUBNET MASK sets the Subnet Mask
4-7-4) GATEWAY ADDRES sets the Gateway Address
4-7-5) RTD PORT # sets the Real-Time Data port number
4-7-6) MAC ADDRESS
displays the console’s MAC Address
4-7-7) NETWK PRO/MMR enables/disables Pro Software & Meet Manager (ON or OFF)
5) TEST MENU
5-1) BATTERY checks battery power level
5-2) LANE MODULES allows testing of lane modules
5-3) SCOREBOARD allows testing of the scoreboard
5-3-1) CYCLE ON/OFF sends an all ON signal to the scoreboard in 3 second intervals
5-3-2) DRIVER ADDRESS displays the driver address(es)
5-3-3) DIGIT NUMBER displays digit numbers
2-Diving Menu Navigation
1) SCBD MENU
1-1) SCBD ON/OFF clears the display
1-2) DIMMING sets the dimming (brightness) level of the display
1-3) TIME OF DAY displays the Time-of-Day and time format
2) EDIT MENU
2-1) TEAM SCORE allows editing of team scores
2-2) EVENT ORDER allows editing of event orders
2-2-1) EDIT ORDER edits the event order
2-2-2) INSERT EVENT inserts an event into the order
2-2-3) DELETE EVENT deletes an event
2-2-4) CLEAR ORDER clears the event order
2-3) CLEAR ORDER (A-D) clears only one of the four dive orders
2-4) DIVER ORDER allows editing of the diver order
2-5) CLEAR TOTALS clears scoring totals
2-6) DIVER TOTALS allows editing of the diver score totals
3) PRINT MENU
3-1) DIVE RESULTS prints the results of the dives or a complete meet
3-2) EVENT ORDER prints out the selected event orders
3-3) SETTINGS prints out all configurations entered in the Setup Menu
3-4) IND DIVE LIST prints the individual dive list of a selected diver
3-5) ALL DIVE LIST prints out the entire dive list