Daktronics OmniSport 2000 Timing Console - Manual (Page 115)

Diving Mode Operation, Menus & Settings 97
MENU-EDI T
6-DI VER TOTALS
MENU-MAI N
3-PRI NT MENU
MENU-PRI NT
1-DI VE RESULTS
Press [YES] to clear the totals. Press [NO] to exit the menu and leave the totals as is.
When to use this:
 If the Dive Order has been pre-entered and due to testing or for whatever reason, the
divers have points awarded to them, the function will set all of the stats for the
selected Dive Order to 0.00.
Diver Totals
This menu is used to edit the total scores for each diver in
the selected dive order. The specific dive order to be edited
must be selected before entering the menu. To do this, refer
to Selecting the Order in Section 7.5.
Press [ENTER] to select a diver to edit. Use the number keypad to edit the totals of a diver.
Press [ENTER] to accept the changes. The arrow keys increment and decrement the diver
number by one. Press [CLEAR] to leave the menu and return to the Edit menu.
When to use this:
 If the divers are carrying a score from a previous round, like from prelims to finals.
7.9 Print Menu
The Print Menu allows the operator to print a specific event
result, the current event order in the OmniSport 2000
console, or the settings for the current console configuration.
Print Dive Results
This menu is used to print results from the Dive Order
currently selected (Figure 99).
Press [YES] to print the selected results.
Press [NO] to return to the Print Menu.
When to use this:
 Use this to re-print dive results on the console’s
built-in thermal printer.
Figure 99: Dive Results Printout
From Main Menu – [2>[5]
From Main Menu – [2>[6]
From Main Menu – [3]
From Main Menu – [3]>[1]
From Main Menu – [2]> [↑]
CLEAR OUT DI VER
TOTALS-A Y/N?
EVENT A TOTALS
#01 TOT: 0:00
MENU-PRI NT
PRI NT RESULTS?