Daktronics OmniSport 2000 Timing Console - Manual (Page 77)

Swimming Mode Menus & Settings 59
MENU-SETUP
5-PRI NTER
MENU-PRI NTER
1-RACE LOG
MENU-PRI NTER
2-RESULTS
MENU-PRI NTER
3-BACKUPS
5.10 Setup Printer Menu
This menu configures which printouts will be printed on
the built-in printer in the console as well as the intensity of
the print on those printouts.
Race Log
The Race Log allows the logging to be turned ON/OFF.
Typically the Race Log is set ON. As times are registered,
the printer will automatically print the results (Figure 66).
Use [←][→] to toggle between ON/OFF and then press [ENTER] to save.
When to use this:
 Using the Race Log is the most thorough way to identify issues with the system.
Daktronics recommends that the Race Log is always turned on.
Results
The Results Menu selects printouts by LANE or PLACE
order. The Results printout format is usually the preference
of the person handling the meet management program and
is used for verification.
Use [←][→] to toggle between LANE/PLACE and then press [ENTER] to save.
Backups
This menu configures if backup times will be printed with
the race results. Printing Backup Times is usually the
preference of the person handling the meet management program.
Use [←][→] to toggle between YES/NO and then press [ENTER] to save.
From Main Menu – [4]>[5]
From Main Menu – [4]>[5]>[1]
From Main Menu – [4]>[5]>[2]
From Main Menu – [4]>[5]>[3]
MENU-PRI NTER
RACE LOG: ON*
MENU-PRI NTER
RSLTS BY: LANE * MENU-PRI NTER
RSLTS BY: PLACE*
MENU-PRI NTER
BACKUPS: YES* MENU-PRI NTER
BACKUPS: NO *