Daktronics OmniSport 2000 Timing Console - Manual (Page 300)

248 Console & Software Revision History
Version 4.1.23 - Release date: 23 January 2004
General
 Added Channel 0D and 13 to CTS scoreboard output for home and guest scores.
Swimming
 Eliminated timeout in Hy-Tek software waiting for button times from Results output
when none were recorded on the lane modules.
Water Polo
 Added control of horn to CTS scoreboard output.
 Corrected layouts of 1 to 10 line scoreboards on the Multidrop and CTS scoreboard
outputs.
Version 4.4.13 - Release date: 4 April 2004
Diving
 Added interface to dive results program on Results Port.
 Added display of event number and round on the RTD Port.
 Added judge’s console status to LCD and transmission to Pro application.
 Corrected periodic lockup problem with judge consoles.
Pace Clock
 Corrected problem of another edit key being pressed while editing step type
(swim, rest, etc.).
Version 4.10.28 - Release date: 28 October 2004
General
 Increased the maximum number of judge consoles from 9 to 18 for
synchronized swimming.
 Added support for control of wireless handheld judge’s consoles.
Swimming
 Added tenths of a second to CTS output.
 Corrected problem with the transfer of DQ’s from the Pro application to the meet
manager when the race number was greater than 255.
Diving
 Added support for synchronized diving in the Diving Pro application.
 Corrected problem with the transfer of the dive order from meet manager to
timing console.
Pace Clock
 Corrected problem with STOP being first step in workout.
Synchronized Swimming
 Added first release of program
Track
 Added tenths of a second to CTS output.
 Added configuration for always showing the running time on a single line
scoreboard for the non-lane timing mode.
Version 5.1.4 - Release date: 4 January 2005
Swimming
 Added ability to record start reaction times on relay takeoff sensors.
 Increased number of relay exchanges from 3 to 6.
 Added ability to transfer start reaction and relay exchange times to meet manager.
 Added ability to display start reaction times on Enhanced RTD output when the
mode is set to Lane order.