Daktronics OmniSport 2000 Timing Console - Manual (Page 224)

206 Track Mode Menus & Settings
MENU-MAI N
5-TEST MENU
MENU-TEST
1-BATTERY
MENU-TEST
2-LANE MODULES
MENU-NETWORK
7-NETWK PRO/MMR
Meet Manager Software Enable
This menu allows the operator to enable network
communications to Meet Manager software.
Use [←][→] to toggle between ON/OFF and then press [ENTER] to continue.
15.12 Test Menu
The OmniSport 2000 timer is equipped with features that
test battery level, the lane modules, and the numeric
scoreboard. The following submenus explain how to use
each of these tests. It is important to run through these tests
before the meet begins to prevent problems from occurring during the meet.
Battery Test
This menu checks the battery power level.
The battery level will show as CHARGED or LOW. Press [ENTER] to exit the menu.
Lane Module Test
This menu tests the lane module inputs.
The left and middle LCDs will show the lane module input status by lane. All devices should
be tested before every session. Press [ENTER] to exit the menu.
From Main Menu – [5>[1]]
From Main Menu – [5]>[2]
From Main Menu – [5]
BATTERY TEST
LEVEL= CHARGED BATTERY TEST
LEVEL= LOW
[NEAR END DATA
[FAR END DATA
From Main Menu – [4]>[6]>[7]
MENU-NETWORK
NETWORK MMR:ON *
MAC ADDRESS
09:ec:03:01:06
From Main Menu – [4]>[6]>[6]