Daktronics OmniSport 2000 Timing Console - Manual (Page 275)

Menu Navigation Shortcuts 223
3-2) SCOREBOARD configures the scoreboard settings
3-2-1) NUMERIC sets output data for numeric scoreboards
3-2-1-1) # OF LINES sets the number of lines on the scoreboard
3-2-1-2) SCORE MODULE sets whether the scoreboard has a team score module
3-2-2) RTD/MATRIX sets output data for matrix displays
3-2-2-1) RTD OFFSET sets how data is sent to the display with 2+ consoles or pools
3-3) COMM PORTS configures the communication ports
3-3-1) SCBD OUTPUTS sets the J2/J3 protocol (MULTIDROP, MULTILINE, or OMEGA)
3-3-2) RTD PORT sets the J5 protocol (RTD or CTS)
3-3-3) RESULTS PORT sets the J6 protocol (OMNI 2000, OMNI 6000, or CTS)
3-4) PRINTER configures printouts and the printer.
3-4-1) GAME LOG sets whether to enable game logging (ON or OFF)
3-4-2) INTENSITY sets printer intensity (contrast)
3-5) TIME OF DAY sets the day/month/year and hours/minutes/seconds
3-6) NETWORK configures the ETHERNET port
3-6-1) NETWORK ENABLE enables/disables the ETHERNET port (ON or OFF)
3-6-2) IP ADDRESS sets the IP Address
3-6-3) SUBNET MASK sets the Subnet Mask
3-6-4) GATEWAY ADDRES sets the Gateway Address
3-6-5) RTD PORT # sets the Real-Time Data port number
3-6-6) MAC ADDRESS
displays the console’s MAC Address
4) TEST MENU
4-1) BATTERY checks battery power level
4-2) SCOREBOARD allows testing of the scoreboard
4-2-1) CYCLE ON/OFF sends an all ON signal to the scoreboard in 3 second intervals
4-2-2) DRIVER ADDRESS displays the driver address(es)
4-2-3) DIGIT NUMBER displays digit numbers
5-Synchronized Swimming Menu Navigation
1) SCBD MENU
1-1) SCBD ON/OFF clears the display
1-2) DIMMING sets the dimming (brightness) level of the display
1-3) TIME OF DAY displays the Time-of-Day and time format
2) SETUP MENU
2-1) TIMER
2-1-1) JUDGES sets the number of judges
2-1-2) PANEL sets the number of panels
2-1-3) BEEPER VOLUME sets the volume of the internal beeper
2-2) SCOREBOARD configures the scoreboard settings
2-2-1) NUMERIC sets output data for numeric scoreboards
2-2-1-1) NUMBER OF LINES sets the number of lines on the scoreboard
2-2-1-2) PAGE TIME sets how long each page will hold on the scoreboard
2-2-1-3) MULTISPORT SCBD sets whether the scoreboard is multisport (YES or NO)
2-2-2) RTD/MATRIX sets output data for matrix displays
2-2-2-1) RTD OFFSET sets how data is sent to the display with 2+ consoles or pools
2-3) COMM PORTS configures the communication ports
2-3-1) SCBD OUTPUTS sets the J2/J3 protocol (MULTIDROP, MULTILINE, or OMEGA)
2-3-2) RTD PORT sets the J5 protocol (RTD or CTS)
2-3-3) RESULTS PORT sets the J6 protocol (OMNI 2000, OMNI 6000, or CTS)
2-4) PRINTER configures printouts and the printer
2-4-1) SWIM LOG sets whether to enable swim logging (ON or OFF)
2-4-2) INTENSITY sets printer intensity (contrast)
2-5) TIME OF DAY sets the day/month/year and hours/minutes/seconds