Daktronics OmniSport 2000 Timing Console - Manual (Page 83)

OmniSport 2000 Pro Swimming Software 65
Section 6: OmniSport 2000 Pro Swimming
Software
The OmniSport 2000 Pro Swimming software interfaces with the OmniSport 2000 timer and
allows timing officials to control the competition through an easy-to-use, reliable and convenient
Windows
®
-based user interface installed on a Windows compatible computer system.
There must be a serial connection for the timing operations to be controlled by the Pro software.
The OmniSport 2000 timer must also be connected properly to all competition equipment and
accessories
if using a display or judge’s consoles. Refer to Section 2 for more information
pertaining to the hardware installation of the OmniSport 2000 timer.
This section describes how to install, configure and use this software system, Version 3.0.0 or higher
6.1 Computer Requirements
The OmniSport 2000 Pro Swimming software was designed to operate on a Windows
compatible personal computer. In most circumstances, the computer used by the software
will be purchased through Daktronics. This ensures the software requirements will be met.
If a computer is not purchased through Daktronics, the following list describes the
requirements for the OmniSport 2000 Pro software.
 Windows XP operating system or better (Windows 7/8 is supported only in Pro
Swimming version 1.2.2 or higher - both 32 & 64 bit operating systems are supported)
 CPU and RAM must at least be equal to minimum requirements of operating system
 Internet Explorer ® 5.0 or higher
 One Ethernet jack OR one serial port for connection to the OmniSport 2000 console
(one USB port and USB-to-serial adapter may be used in place of a serial port)
6.2 Installation
To install the Pro Swimming software from the Internet:
1. Open an Internet browser to:
http://dakfiles.daktronics.com/downloads/Sports_Products/OmniSport%202000/
Pro/Swimming
2. Click the “OmniPROSwimmingInstall.exe” file, and then click Run (twice if
necessary) to begin the installation procedure.
3. Follow the onscreen instructions to complete the installation.