Daktronics OmniSport 2000 Timing Console - Manual (Page 103)

Diving Mode Operation, Menus & Settings 85
SELECT SPORT
2-DI VI NG
Section 7: Diving Mode Operation, Menus &
Settings
Reference Drawings:
Insert; LL-2566 Omni 2000, Diving ............................................................... Drawing B-180044
The sport insert drawing is located in Appendix A. If an insert is lost or damaged, a copy of the insert
drawing can be used until a replacement can be ordered. Refer to Section 3 for information on
starting the timer and for instructions on using the sport insert.
7.1 General Features
The OmniSport 2000 console includes a diving program that is useful for smaller dive meets.
If the meet requirements exceed the functionality of the program built into the console, refer
to Section 9. Some of the major features include:
 Up to four separate dive orders (events) labeled A, B, C and D
 Up to 25 divers per dive order
 Up to 13 rounds per diver
 Uses 2, 3, 5, 7 or 9 judge’s scores to calculate the award
 Three methods of entering dive sheets:
o
Manually before the event
o While the event is running
o Download from a results program like E-dive or DiveMeets.com
 Dive sheets contain the four digit dive number, position and degree of difficulty
for each dive
 Ability to cut divers
 Log and results printouts
 Judges’ scores can be entered:
o
By the OmniSport 2000 console operator using the keypad
o By individual judge consoles (optional)
Three things to remember about the OmniSport 2000 diving program:
 Divers’ names or affiliation are not entered into the console and do not appear on
the display or printouts.
 Judges’ scores and round scores are not stored in the console.
 The console does not have a pre-programmed dive list with the Degree of Difficulty
(DD) for each dive. The operator will need to enter a DD for each dive.
7.2 Getting Started
When starting the OmniSport 2000 console, set the console
to the diving mode. Refer to Section 3.4 and press [ENTER]
when the right LCD shows 2-DIVING.