Daktronics OmniSport 2000 Timing Console - Manual (Page 266)

OmniSport 2000, Pro Swimming, & Hy-Tek Software Quick Guide 6 of 6
ED-13876 Rev 5
19 August 2013
201 Daktronics Drive PO Box 5128, Brookings, SD 57006-5128
Tel: 1-800-DAKTRONICS (1-800-325-8766) Fax: 605-697-4746
Web: www.daktronics.com/support
Downloading Event Lists to OmniSport 2000
When downloading an Event List, make sure that the OmniSport 2000
console is in Swimming mode and that the running time is reset.
1. From the main menu of MEET MANAGER, click Run.
2. In the Run the Meet window, go to Interfaces > Timer (DAK2) >
Download Events to DAK2.
3. The following message will appear. As long as the correct events
are listed, click Yes.
4. After the Event List has successfully transferred to the console,
the following message will appear. Click OK.
MEET MANAGER Alpha Scoreboard Interface
1. From the main menu of MEET MANAGER, go to Set-up >
Alpha Scoreboard Interface.
2. In the Scoreboard Vendor window, select Daktronics.
Note: For extended results, select Generic and refer to the
Aquatics Interface Technical Guide (DD1387596).
3. Click OK to save the settings.
Note: The Connection Method may be set to either choice.
Refer to the Aquatics Interface Technical Guide (DD1387596) for more
information about connecting to Daktronics display control software
and creating content with the desired data fields.