Daktronics OmniSport 2000 Timing Console - Manual (Page 255)

ED13584
Rev 8 19 August 2013
Page 3 of 8 201 Daktronics Drive PO Box 5128, Brookings, SD 57006-5128
Tel: 1-800-DAKTRONICS (1-800-325-8766) Fax: 605-697-4700
Web: www.daktronics.com/support
[1] SCBD MENU
[11] SCBD ON/OFF
[12] DIMMING
[13] TIME OF DAY
[2] EDIT MENU
[21] TEAM SCORE
[22] EVENT ORDER
[221] EDIT ORDER
[222] INSERT EVENT
[223] DELETE EVENT
[224] CLEAR ORDER
[23] CLEAR ORDER (A-D)
[24] DIVER ORDER
[25] CLEAR TOTALS
[26] DIVER TOTALS
[3] PRINT MENU
[31] DIVE RESULTS
[32] EVENT ORDER
[33] SETTINGS
[34] IND DIVE LIST
[35] ALL DIVE LIST
[4] SETUP MENU
[41] TIMERS
[411] NUMBER JUDGES
[412] POSITION CODE
[413] BEEPER VOLUME
[42] SCOREBOARD
[421] NUMERIC
[4211] # OF LINES
[4212] LEAD DIVER
[4213] MULTISPORT SB
[422] RTD/MATRIX
[4221] RTD OFFSET
[43] COMM PORTS
[431] SCBD OUTPUTS
[432] RTD PORT
[433] RESULTS PORT
[44] PRINTER
[441] DIVE LOG
[442] INTENSITY
[45] TIME OF DAY
[46] NETWORK
[461] NETWORK ENABLE
[462] IP ADDRESS
[463] SUBNET MASK
[464] GATEWAY ADDRES
[465] RTD PORT #
[466] MAC ADDRESS
[467] NETWK PRO/MMR
[5] TEST MENU
[51] BATTERY
[52] SCOREBOARD
[521] CYCLE ON/OFF
[522] DRIVER ADDRESS
[523] DIGIT NUMBER
[53] JUDGES CONSOLES
[54] CAN NETWORK
OmniSport 2000 Diving Menu Navigation
Two methods for navigating through the OmniSport 2000 menus.
The first method allows the operator to step through each of the menu levels. To use this method press [
MENU ] and
then use [], [], [], and [] to scroll through the menus. Press [ ENTER ] to select the menu displayed on the LCD.
The second method is to go directly to a menu. Press [
MENU ] followed by the one to three digit number from the list
below and the LCD will prompt you for the desired setting or action in that menu. For example, “32” will print the
Event Order.
After you are done navigating through the menus, press [
MENU ] to return to the meet in progress.
Special Functions
Editing a Diver’s Total Score
 Press [ MENU ]>[2]>[6]. Next, press [] and [] to display the diver number and their total score on the right
LCD. Press [ ENTER ] and use [0]-[9] to input the correct total. Press [ ENTER ] to finish editing that diver.
Clearing the Total Scores without clearing the Dive Order
 Press [ MENU ]>[2]> [5]>[ ENTER ].
Printing the Total Scores for the current Dive Order
 Press [ PRINT > [1]>[ ENTER ].
Printing the Dive List for the current Diver
 Press [ PRINT ]>[2]>[ ENTER ].
Printing the Dive List for all divers in the current Dive Order
 Press [ PRINT ]>[3]>[ ENTER ].