Daktronics OmniSport 2000 Timing Console - Manual (Page 273)

Menu Navigation Shortcuts 221
4) SETUP MENU
4-1) TIMER sets the number of judges and positions used in the meet
4-1-1) NUMBER JUDGES sets the number of judges
4-1-2) POSITION CODE sets the Dive Positions label (ABCD or SPTF)
4-1-3) BEEPER VOLUME sets the volume of the internal beeper
4-2) SCOREBOARD configures the scoreboard settings
4-2-1) NUMERIC sets output data for numeric scoreboards
4-2-1-1) # OF LINES sets the number of lines on the scoreboard
4-2-1-2) LEAD DIVER sets whether to display the lead diver (YES or NO)
4-2-1-3) MULTISPORT SB sets whether the scoreboard is multisport (YES or NO)
4-2-2) RTD/MATRIX sets output data for matrix displays
4-2-2-1) RTD OFFSET sets how data is sent to the display with 2+ consoles or pools
4-3) COMM PORTS configures the communication ports
4-3-1) SCBD OUTPUTS sets the J2/J3 protocol (MULTIDROP, MULTILINE, or OMEGA)
4-3-2) RTD PORT sets the J5 protocol (RTD or CTS)
4-3-3) RESULTS PORT sets the J6 protocol (OMNI 2000, OMNI 6000, or CTS)
4-4) PRINTER configures printouts and the printer.
4-4-1) DIVE LOG sets whether to enable dive logging (ON or OFF)
4-4-2) INTENSITY sets printer intensity (contrast)
4-5) TIME OF DAY sets the day/month/year and hours/minutes/seconds
4-6) NETWORK configures the ETHERNET port
4-6-1) NETWORK ENABLE enables/disables the ETHERNET port (ON or OFF)
4-6-2) IP ADDRESS sets the IP Address
4-6-3) SUBNET MASK sets the Subnet Mask
4-6-4) GATEWAY ADDRES sets the Gateway Address
4-6-5) RTD PORT # sets the Real-Time Data port number
4-6-6) MAC ADDRESS
displays the console’s MAC Address
4-6-7) NETWK PRO/MMR enables/disables Pro Software (ON or OFF)
5) TEST MENU
5-1) BATTERY checks battery power level
5-2) SCOREBOARD allows testing of the scoreboard
5-2-1) CYCLE ON/OFF sends an all ON signal to the scoreboard in 3 second intervals
5-2-2) DRIVER ADDRESS displays the driver address(es)
5-2-3) DIGIT NUMBER displays digit numbers
5-3) JUDGE CONSOLES indicates proper connection of judge consoles
5-4) CAN NETWORK allows advanced debugging (Daktronics service personnel only)
3-Pace Clock Menu Navigation
1) SCBD MENU
1-1) SCBD ON/OFF clears the display
1-2) DIMMING sets the dimming (brightness) level of the display
1-3) TIME OF DAY displays the Time-of-Day and time format
2) EDIT MENU
2-1) EDIT WORKOUT allows editing of workouts
(ENTER LANE #)
1) EDIT STEP edits a step within the order
2) INSERT STEP inserts a step into the order
3) DELETE STEP deletes a step
4) COPY WORKOUT copies the workout from one lane to another
5) CLEAR WORKOUT clears the workout from a lane
3) PRINT MENU
3-1) IND WORKOUT prints the entire workout for a specific lane
3-2) ALL WORKOUTS prints all workouts for every lane
3-3) SETTINGS prints out all configurations entered in the Setup Menu