Daktronics OmniSport 2000 Timing Console - Manual (Page 78)

60 Swimming Mode Menus & Settings
MENU-PRI NTER
4-SPLI TS
MENU-PRI NTER
5-# OF COPI ES
MENU-PRI NTER
6-I NTENSI TY
MENU-SETUP
6-TI ME OF DAY
MENU-SETUP
7-NETWORK
MENU-SETUP
1-NETWORK ENABLE
Splits
This menu configures if split times will be printed with the
race results. Use [←][→] to select NONE, SUBTR (subtractive)
or CUMUL (cumulative) split times. Press [ENTER] to save.
Number of Copies
Press the [1]-[5] keys to select the number of copies to print and then press [ENTER] to save.
Intensity
This menu sets the printer’s contrast for easy readability.
The typical level is 5.
Press the [1]-[5] keys to select a new intensity and press [ENTER] to save.
5.11 Setup Time-of-Day Menu
This menu is used to set the console’s date and time.
Press the [0]-[9] keys to enter the correct date and time and then press [ENTER] to save.
Press [CLEAR] twice to exit without saving and retain the previous time and date.
5.12 Setup Network Menu
This menu is used to configure various network settings for
outputting Real-Time Data (RTD) to displays and connecting
to Pro Swimming and Meet Manager software.
Network Enable
This menu sets the ETHERNET jack output on or off. If the
jack is not needed, it can be turned OFF (default).
From Main Menu – [4]>[6]
From Main Menu – [4]>[5]>[6]
From Main Menu – [4]>[5]>[4]
From Main Menu – [4]>[5]>[5]
MENU-PRI NTER
4-SPLI TS: NONE * MENU-PRI NTER
4-SPLI TS: SUBTR* MENU-PRI NTER
4-SPLI TS: CUMUL*
PRI NT COPI ES
NUMBER 1-5: 1*
PRI NT I NTENSI TY
LEVEL 1-5: 5*
DATE MM/DD/YY
TOD HH:MM:SS*
MENU-NETWORK
NETWORK: ON *
From Main Menu – [4]>[7]>[1]
MENU-NETWORK
NETWORK: OFF*