Daktronics OmniSport 2000 Timing Console - Manual (Page 104)

86 Diving Mode Operation, Menus & Settings
The three LCDs on the OmniSport 2000 keep the operator informed during all operations.
Note the following layout of the LCDs shown in the diving mode.
The left LCD shows the diver number, round and diver rank. The middle LCD displays the
current diver’s dive type, position, degree of difficulty and total score for that round. The
right LCD shows the selected dive order and the event number.
7.3 Keypad Insert Descriptions
The Diving keypad insert (LL-2566) is illustrated in Figure 97 and Drawing B-180044.
For general information about the keypad, refer to Section 3.2.When looking at the keys,
notice that some of them have been grouped together by location and others have been
grouped with a border. The keys with borders are used together or perform similar
operations, as described in the following sections.
Judges
’ Score Keys
The numbers along the top of the insert are the scoring keys. These keys contain numbers
ranging from zero to ten at half-point intervals (0, 0.5, 1, 1.5, etc.). The keys with borders are
used to enter the judges’ scores. The console then calculates the awarded score using the
formula selected and the degree of difficulty.
Note: Do not confuse the scoring keys with the permanent number keypad at
the right side of the console. The number keypad is used to enter in all of the editable
information such as menu selections, round and diver edits. The scoring keys are only
used to enter scores.
Round Key
The diving program in the console scores up to 13 rounds. To view which round the console
is currently scoring, look at the second line of the left LCD. To change the current round,
press [ROUND
 ] then use [0]-[9]>[ENTER] to input the desired round #.
Pressing [←] or [→] is another method to increment or decrement the current round number.
Figure 97: Diving Insert LL-2566
Judges’ Score Keys
DI VER# 01
ROUND:01 RANK:-- DI VE 105B DD2.6
TOTAL: 0.00 EVENT: 2
DI VE ORDER-A