Daktronics OmniSport 2000 Timing Console - Manual (Page 117)

Diving Mode Operation, Menus & Settings 99
MENU-PRI NT
5-ALL DI VE LI ST
MENU-SETUP
1-TI MER
MENU-TI MER
1-NUMBER JUDGES
MENU-TI MER
2-POSI TI ON CODE
Print All Dive List
This menu prints the dive list for all divers in the current
dive order (Figure 103).
Press [YES] to print the dive list for all divers.
Press [NO] to exit the menu without printing.
When to use this:
 If the operator needs to print an active order for
all divers in that event.
7.10 Setup Timer Menu
This menu contains the settings that tell the console how
many judges will score the events and what designators
they will use for the positions.
Number of Judges
This menu configures the number of judges (2, 3, 5, 7, or 9)
used to score an event.
Press [2], [3], [5], [7], or [9] to input the number of judges used for the event, and then press
[ENTER] to save. If seven or nine judges are selected, the console prompts the user for a
formula selection. Use [←][→]
to toggle to the correct formula and press [ENTER] to accept
or [CLEAR] to exit the judges’ menu.
Position Code
This is a user preference to identify if the Dive Positions
will be labeled A, B, C, D or S, P, T, F.
Use [←][→]
to toggle to the desired selection and press [ENTER] to save.
Figure 103: Dive List - All
From Main Menu – [4]>[1]
From Main Menu – [3]>[5]
Screen prompt when selecting 9 judges From Main Menu – [4]>[1]>[1]
From Main Menu – [4]>[1]>[2]
Menu - Main
4 - Setup Menu
MENU-PRI NT
PRI NT ALL LI ST?
MENU-TI MER
# OF JUDGES: ^7* SCORI NG FORMULA
DROP 2HI & 2LO*
DI VE POSI TI ON
CODE-ABCD* DI VE POSI TI ON
CODE-SPTF*
From Main Menu – [4]