Daktronics OmniSport 2000 Timing Console - Manual (Page 138)

120 OmniSport 2000 Pro Diving Software
Note: If the cable is connected properly, the connection
indicator in the main application will be green (Figure 118).
If there is a problem with the connection, it will remain red.
Additionally, judge consoles that are not connected will
have a red box beneath their number (Figure 119). When
properly connected, no box will appear.
Once the hardware and software are installed and the
software is running, the OmniSport 2000 Pro system should
synchronize with the timing console. The console’s LCD will
then display Controlled by Pro Diving.
Display Configuration
The Configure Settings window (Figure 120) contains options
for outputting meet information and results to scoreboards
and displays.
Matrix Display Settings
 Diver Name allows the
operator to select how
the divers will be listed:
First Last; Last, First;
Last, Abbr., or Last.
 Determine how to
display the Affiliation
by selecting Full Name
or Abbreviation.
 Select a number (2-10)
of Leaderboard Lines
to display.
Numeric (Fixed Digit)
Display Settings
 Click the Yes/No buttons if using a Multisport display and whether to Show Lead.
 Set the number (1-10) of Lines the board can display.
 Select from 12 Hour or 24 Hour for the Display Time.
 Set the Dimming Level in increments of 10%.
Timer Port Configurations
 Under Meet Manager Port, use the drop-down box to select the correct timing console
being used: Omni 2000, Omni 6000 or CTS.
 Under RTD Port, select RTD or CTS for the type of Real Time Data output.
 Under Scoreboard Port, select Multiline, Multidrop, Omega, or Multicast, depending
on the particular model of scoreboard in use.
 Use the RTD Offset setting when multiple timers are sending Real-Time Data.
Select from 5,000; 10,000; or 15,000 to ensure the data from all timers is accessible.
Other Settings
 Under Importing Dive Orders, select whether to Keep Dives or Replace Dives after
importing a meet file.
Figure 118: Green Connection
Indicator
Figure 119: Judges Consoles
Not Connected
Figure 120: Configure Settings Window