Daktronics OmniSport 2000 Timing Console - Manual (Page 152)

134 OmniSport 2000 Pro Diving Software
Splash Screen
Click to exit the main application screen (Figure 121) and return to splash screen (Figure 109).
Options
Click to view the Configure Settings window which contains options for outputting meet
information and results to scoreboards and displays. See Section 9.7 for more information on
the Display Configuration.
Exit
Click to exit the Pro Diving software. Click Yes to confirm.
Recent Meets
This area displays recently opened/created meets. Click a meet name in the list to open.
Quick Access Toolbar
Users may customize the layout of the menu bar
with the Quick Access Toolbar. Click the
small arrow button next to the OmniSport Start
Button to open the Customize Quick Access
Toolbar menu (Figure 149).
Customize Quick Access Toolbar
Click to open the Customize Quick Access Toolbar window (Figure 150).
1. Under Choose commands from, select a
general category of commands in the
drop-down list.
2. In the left white box, select a specific
command.
3. Click Add to place this command on the
Quick Access Toolbar.
4. Repeat steps 1-3 to add up to 20
additional buttons to the toolbar.
5. To remove any buttons, click the
command in the right white box, and
then click Remove.
6. Click and drag the commands in the
right white box to arrange them in any
order.
7. Click Place Quick Access Toolbar
below the ribbon if desired.
8. Click OK to save the Quick Access
Toolbar buttons (Figure 151).
Maximize/Minimize the Ribbon (currently inactive)
Click to permanently expand the ribbon menu bar. Click again to allow the ribbon menu bar
to collapse when not in use.
Figure 149: Customize Quick Access Toolbar Menu
Figure 150: Customize Quick Access Toolbar
Window
Figure 151: Quick Access Toolbar with Buttons