Daktronics OmniSport 2000 Timing Console - Manual (Page 194)

176 Water Polo Mode Operation, Menus & Settings
MENU-TI MER
2-AUTO SEQUENCE
MENU-TI MER
3-SHOT=0 CONTROL
MENU-TI MER
4-PENALTI ES
MENU-TI MER
5-TI MEOUTS
Auto Sequence
When the Auto Sequence menu is turned ON, the console
will advance to the next time that needs to be counted. For
example, Period 1→Reset Time→Period 2→Rest Time, etc.
See Section 13.4 for a complete description.
If it is OFF, press [YES] to turn it ON, or press [NO] to leave it OFF. If it is ON, press [YES] to
turn it OFF, or press [NO] to leave it ON.
Shot=0 Control
The Shot=0 Control sets whether the game clock stops
when the shot time reaches zero or if the two clocks run
independently of the each other.
If it is OFF, press [YES] to turn it ON, or press [NO] to leave it OFF. If it is ON, press [YES] to
turn it OFF, or press [NO] to leave it ON.
Penalties
This menu sets the maximum number of penalties allowed
for a player before being removed from the pool.
Press the [0]-[9] keys to set the maximum number of penalties and then press [ENTER].
The operator may then select whether to reset the shot clock after a penalty. Press [CLEAR]
twice to leave the settings as is.
Timeouts
The Timeouts menu sets the maximum number of timeouts
allowed for each team.
Press the [0]-[9] keys to set the maximum number of full timeouts allowed for each team and
then press [ENTER]. Follow the same steps to set the number of partial timeouts.
Press [CLEAR] twice to leave the settings as is.
From Main Menu – [3]>[1]>[3]
From Main Menu – [3]>[1]>[2]
From Main Menu – [3]>[1]>[4]
From Main Menu – [3]>[1]>[5]
AUTO SEQ I S OFF
SET ON? Y/N
=0 STOPS CLK-OFF
SET ON? Y/N
MENU-PENALTI ES
MAX PENALTY 3* RESET SHOT-OFF
SET ON? Y/N
MENU-TI MER
# FULL T.O. 3* MENU-TI MER
# PART T.O. 1*