Daktronics OmniSport 2000 Timing Console - Manual (Page 116)

98 Diving Mode Operation, Menus & Settings
MENU-PRI NT
2-EVENT ORDER
MENU-PRI NT
3-SETTI NGS
MENU-PRI NT
4-I ND DI VE LI ST
Print Event Order
This menu is used to print the event order (Figure 100).
Press [YES] to print the event order.
Press [NO] to exit the menu without printing.
When to use this:
 It is a good idea to print out an event order
before starting each session to verify that the
console is expecting to score the events in the
desired order.
Print Settings
This menu is used to print the console’s configuration
(Figure 101).
Press [YES] to print the event order.
Press [NO] to exit the menu without printing.
When to use this:
 Print the settings after the console has been set
up and functioning correctly. Keep this printout
for future reference. It will be valuable if the
console is loaned out to someone else, a change
was made in the console unknowingly, or if the
console was returned to or exchanged by
Daktronics for service.
 It is a good idea to pull out the known good settings and verify them to a new
printout when the equipment is being set up for a meet.
Print Individual Dive List
This menu is used to print the dive order of the current
diver (Figure 102).
Press [YES] to print the individual dive list.
Press [NO] to exit the menu without printing.
When to use this:
 If the operator needs to print an active order for an individual diver.
Figure 100: Event Order Printout
Figure 101: Settings Printout
Figure 102: Dive List - Individual
From Main Menu – [3]>[2]
From Main Menu – [3]>[3]
From Main Menu – [3]>[4]
MENU-PRI NT
PRI NT ORDER? Y/N
MENU-PRI NT
PRI NT SETTI NGS?
MENU-PRI NT
PRI NT I ND LI ST?