Beeper volume, 11 setup numeric scoreboard menu, Number of lines – Daktronics OmniSport 2000 Timing Console User Manual
Page 118: Lead diver, Multisport sb, Setup numeric scoreboard menu

100
Diving Mode Operation, Menus & Settings
MENU-SCOREBOARD
1-NUMERI C
MENU-NUMERI C
1-# OF LI NES
MENU-NUMERI C
2-LEAD DI VER
MENU-NUMERI C
3-MULTI SPORT SB
MENU-TI MER
3-BEEPER VOLUME
Beeper Volume
This menu is for setting the internal beeper volume when
keys are pressed.
Use [↑][↓] or the [0]-[7] keys to set the volume level, with 7 being the loudest setting.
Press [ENTER] to save.
7.11 Setup Numeric Scoreboard Menu
This menu configures how the console will display data on
a numeric scoreboard.
Number of Lines
This menu sets the number of lines (1-10) that the
scoreboard displays. The default is 10.
Press the [0]-[9] keys to enter the number of lines and then press [ENTER] to save.
Lead Diver
This menu determines whether or not the diver with the
most points is displayed.
Use [↑][↓] to select YES/NO and press
[ENTER] to save.
Multisport SB
This menu determines whether or not the display in use at
the facility is a multisport scoreboard.
Use [↑][↓] to select YES/NO and press
[Enter] to save.
From Main Menu
– [4]>[2]
From Main Menu
– [4]>[2]>[1]>[1]
From Main Menu
– [4]>[2]>[1]>[2]
From Main Menu
– [4]>[2]>[1]>[3]
# OF LI NES
LI NES= ^8
DI SPLAY LEAD
DI VER-YES*
MULTI SPORT
SCOREBOARD- NO*
MENU-TI MER
BEEPER VOLUME:5
From Main Menu
– [4]>[1]>[3]