Daktronics OmniSport 2000 Timing Console - Manual (Page 263)

OmniSport 2000, Pro Swimming, & Hy-Tek Software Quick Guide 3 of 6
ED-13876 Rev 5
19 August 2013
201 Daktronics Drive PO Box 5128, Brookings, SD 57006-5128
Tel: 1-800-DAKTRONICS (1-800-325-8766) Fax: 605-697-4746
Web: www.daktronics.com/support
MEET MANAGER Timing Console Interface Setup
1. From the main menu of MEET MANAGER, go to Set-up >
Timing Console INTERFACE.
2. In the Timer Vendor window, select Daktronics OmniSport 2000.
3. Under Connection Method- OmniSport 2000 Only, select Serial Port
or USB to Serial.
4. Click OK to save the settings.
MEET MANAGER & OmniSport 2000 Communication
1. From the main menu of MEET MANAGER, click Run.
2. In the Run the Meet window, go to Interfaces > Timer (DAK2) >
Open/Close Serial Port for DAK2.
3. In the Select Serial Port for Daktronics OmniSport 2000 window,
enter the Serial Com Port that will be used to connect MEET
MANAGER to the OmniSport 2000 (typically 1) and click OK.
4. When all connections and configurations are correct,
the Communications Passed message appears with the version
of firmware in the OmniSport 2000 console. Click OK.