Interlogix GE-DSSG-244-POE User Manual - Manual (Page 92)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
90
Figure 4-5-6 LACP Port Status page screenshot
The page includes the following fields:
Object Description
•
Port The switch port number.
•
LACP 'Yes' means that LACP is enabled and the port link is up. 'No' means that LACP is
not enabled or that the port link is down. 'Backup' means that the port could not
join the aggregation group but will join if other port leaves. Meanwhile it's LACP
status is disabled.
•
Key The key assigned to this port. Only ports with the same key can aggregate
together.
•
Aggr ID The Aggregation ID assigned to this aggregation group.
IDs 1 and 2 are GLAGs while IDs 3-14 are LLAGs.
•
Partner System ID The partners System ID (MAC address).
• Partner Port The partners port number connected to this port.
Buttons
: Click to refresh the page immediately.
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.