Interlogix GE-DSSG-244-POE User Manual - Manual (Page 334)

User’s Manual of NS3601-24P/4S Series
332
Security Network ARP Inspection Port Mode
Description:
Set or show the ARP Inspection port mode.
Syntax:
Security Network ARP Inspection Port Mode [] [enable|disable]
Parameters:
: Port list or 'all', default: All ports
enable : Enable ARP Inspection port
disable : Disable ARP Inspection port
(default: Show ARP Inspection port mode)
Default Setting:
Disable
Example:
Enable the ARP inspection mode of port 1
SWITCH/>security network arp inspection port mode 1
Security Network ARP Inspection Entry
Description:
Add or delete ARP inspection static entry.
Syntax:
Security Network ARP Inspection Entry [] add|delete
Parameters:
: Port list or 'all', default: All ports
add : Add new port ARP inspection static entry
delete : Delete existing port ARP inspection static entry
: VLAN ID (1-4095)
: MAC address (xx-xx-xx-xx-xx-xx), MAC address allowed for doing ARP request
: IP address (a.b.c.d), IP address allowed for doing ARP request
Default Setting:
300
Example:
Add ARP inspection static entry.
SWITCH/>security network arp inspection entry 1 add 1 00-30-4f-00-00-11 192.168.0.11
Security Network ARP Inspection Status
Description:
Show ARP inspection static and dynamic entries.
Syntax:
Security Network ARP Inspection Status []
Parameters:
: Port list or 'all', default: All ports
Example:
Show ARP inspection static and dynamic entries.
SWITCH/>security network arp inspection status