Firmware command, Firmware load, Firmware ipv6 load – Interlogix GE-DSSG-244-POE User Manual User Manual
Page 373: Upnp command, Upnp configuration, Upnp mode

User’s Manual of NS3601-24P/4S Series
371
Firmware Command
Firmware Load
Description:
Load new firmware from TFTP server.
Syntax:
Firmware Load
Parameters:
: IP host address (a.b.c.d) or a host name string
: Firmware file name
Firmware IPv6 Load
Description:
Load new firmware from IPv6 TFTP server.
Syntax:
Firmware IPv6 Load
Parameters:
: TFTP server IPv6 address
UPnP Command
UPnP Configuration
Description:
Show UPnP configuration.
Syntax:
UPnP Configuration
Example:
Show UPnP configuration.
SWITCH/>upnp configuration
UPnP Configuration:
===================
UPnP Mode : Disabled
UPnP TTL : 4
UPnP Advertising Duration : 100
UPnP Mode
Description:
Set or show the UPnP mode.
Syntax:
UPnP Mode [enable|disable]
Parameters: