Ip ntp server ipv6 add, Ip ntp server delete, Port management command – Interlogix GE-DSSG-244-POE User Manual User Manual
Page 279: Port configuration
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
277
IP NTP Server Add
Parameters:
: The server index (1-5)
: IP host address (a.b.c.d) or a host name string
Example:
To add NTP server:
SWITCH/>ip ntp server add 1 60.249.136.151
IP NTP Server IPv6 Add
Description:
Add NTP server IPv6 entry.
Syntax:
IP NTP Server Ipv6 Add
Parameters:
: The server index (1-5)
: IPv6 server address. IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal
digits with a colon separates each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special
syntax that can be used as a shorthand way of representing multiple 16-bit groups of contiguous zeros; but it
can only appear once. It also used a following legally IPv4 address. For example,'::192.1.2.34'.
Example:
To add IPv6 NTP server:
SWITCH/>ip ntp server ipv6 add 1 2001:7b8:3:2c::123
IP NTP Server Delete
Description:
Delete NTP server entry.
Syntax:
IP NTP Server Delete
Parameters:
: The server index (1-5)
Example:
To delete NTP server:
SWITCH/>ip ntp server delete 1
Port Management Command
Port Configuration
Description:
Show port configuration.
Syntax:
Port Configuration [