Interlogix GE-DSSG-244-POE User Manual - Manual (Page 46)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
44
: Click to refresh the page; any changes made locally will be undone.
IP Configuration
The IP Configuration includes the IP Address, Subnet Mask and Gateway. The Configured column is used to view or change the IP
configuration. Fill up the IP Address, Subnet Mask and Gateway for the device. The screen is shown
Figure 4-2-2 .
Figure 4-2-2 IP Configuration page screenshot
The Current column is used to show the active IP configuration.
Object Description
•
DHCP Client Enable the DHCP client by checking this box. If DHCP fails and the configured IP
address is zero, DHCP will retry. If DHCP fails and the configured IP address is
non-zero, DHCP will stop and the configured IP settings will be used. The DHCP
client will announce the configured System Name as hostname to provide DNS
lookup.
•
IP Address
Provide the IP address of this switch in dotted decimal notation.
•
IP Mask
Provide the IP mask of this switch dotted decimal notation.
•
IP Router
Provide the IP address of the router in dotted decimal notation.
• VLAN ID Provide the managed VLAN ID. The allowed range is 1 through 4095.
• DNS Server Provide the IP address of the DNS Server in dotted decimal notation.
• DNS Proxy When DNS proxy is enabled, DUT will relay DNS requests to the current
configured DNS server on DUT, and reply as a DNS resolver to the client device
on the network.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.