Interlogix GE-DSSG-244-POE User Manual - Manual (Page 320)

User’s Manual of NS3601-24P/4S Series
318
Parameters:
: Time between EAPOL retransmissions (1-65535 seconds)
(default: Show current EAPOL retransmission timeout)
Default Setting:
30
Example:
Set the time between EAPOL retransmissions for 100sec.
SWITCH/>security network nas eapoltimeout 100
Security Network NAS Agetime
Description:
Time in seconds between check for activity on successfully authenticated MAC addresses.
Syntax:
Security Network NAS Agetime []
Parameters:
: Time between checks for activitiy on a MAC address that succeeded autentication
(default: Show current age time)
Default Setting:
300
Example:
Set NAS age time in 1000sec
SWITCH/>security network nas agetime 1000
Security Network NAS Holdtime
Description:
Time in seconds before a MAC-address that failed authentication gets a new authentication chance.
Syntax:
Security Network NAS Holdtime []
Parameters:
: Hold time before MAC addresses that failed authentication expire
(default: Show current hold time)
Default Setting:
10
Example:
Set NAS hold time in 100sec
SWITCH/>security network nas holdtime 100
Security Network NAS RADIUS_QoS
Description:
Set or show either global enabledness (use the global keyword) or per-port enabledness of RADIUS-assigned QoS.
Syntax:
Security Network NAS RADIUS_QoS [global|] [enable|disable]
Parameters:
global : Select the global RADIUS-assigned QoS setting