Interlogix GE-DSSG-244-POE User Manual - Manual (Page 167)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
165
•
Frame Type
Select the frame type for this ACE.
Any
: Any frame can match this ACE.
Ethernet Type : Only Ethernet Type frames can match this ACE.
ARP : Only ARP frames can match this ACE.
IPv4 : Only IPv4 frames can match this ACE.
•
Action Specify the action to take with a frame that hits this ACE.
Permit
: The frame that hits this ACE is granted permission for the ACE operation.
Deny : The frame that hits this ACE is dropped.
•
Rate Limiter
Specify the rate limiter in number of base units. The allowed range is 1 to 15. Disabled
indicates that the rate limiter operation is disabled.
• Port Copy Frames that hit the ACE are copied to the port number specified here. The allowed
range is the same as the switch port number range. Disabled indicates that the port
copy operation is disabled.
• Logging Specify the logging operation of the ACE. The allowed values are:
Enabled
: Frames matching the ACE are stored in the System Log.
Disabled : Frames matching the ACE are not logged.
Please note that the System Log memory size and logging rate is limited.
• Shutdown Specify the port shut down operation of the ACE. The allowed values are:
Enabled
: If a frame matches the ACE, the ingress port will be disabled.
Disabled : Port shut down is disabled for the ACE.
• Counter The counter indicates the number of times the ACE was hit by a frame.
„
MAC Parameters
Object Description
•
SMAC Filter (Only displayed when the frame type is Ethernet Type or ARP.)
Specify the source MAC filter for this ACE.
Any
: No SMAC filter is specified. (SMAC filter status is "don't-care".)
Specific : If you want to filter a specific source MAC address with this ACE, choose this
value. A field for entering an SMAC value.
•
SMAC Value When "Specific" is selected for the SMAC filter, you can enter a specific source MAC
address. The legal format is "xx-xx-xx-xx-xx-xx". A frame that hits this ACE matches
this SMAC value.
•
DMAC Filter
Specify the destination MAC filter for this ACE.
Any
: No DMAC filter is specified. (DMAC filter status is "don't-care".)
MC : Frame must be multicast.
BC : Frame must be broadcast.
UC : Frame must be unicast.
Specific : If you want to filter a specific destination MAC address with this ACE, choose
this value. A field for entering a DMAC value.
•
DMAC Value When "Specific" is selected for the DMAC filter, you can enter a specific destination
MAC address. The legal format is "xx-xx-xx-xx-xx-xx". A frame that hits this ACE
matches this DMAC value.
„ VLAN Parameters
Object Description
•
VLAN ID Filter Specify the VLAN ID filter for this ACE.
Any
: No VLAN ID filter is specified. (VLAN ID filter status is "don't-care".)
Specific : If you want to filter a specific VLAN ID with this ACE, choose this value.
A field for entering a VLAN ID number.
•
VLAN ID
When "Specific" is selected for the VLAN ID filter, you can enter a specific VLAN
ID number. The allowed range is 1 to 4095. A frame that hits this ACE matches
this VLAN ID value.
•
Tag Priority
Specify the tag priority for this ACE. A frame that hits this ACE matches this tag
priority. The allowed number range is 0 to 7. The value Any means that no tag
priority is specified (tag priority is "don't-care".)