Interlogix GE-DSSG-244-POE User Manual - Manual (Page 299)

User’s Manual of NS3601-24P/4S Series
297
SWITCH/>security switch access configuration
Access Mgmt Configuration:
==========================
System Access Mode : Disabled
System Access number of entries: 0
Security Switch Access Mode
Description:
Set or show the access management mode.
Syntax:
Security Switch Access Mode [enable|disable]
Parameters:
enable : Enable access management
disable : Disable access management
(default: Show access management mode)
Default Setting:
disable
Example:
Enable access management function.
SWITCH/>security switch access mode enable
Security Switch Access Add
Description:
Add access management entry.
Syntax:
Security Switch Access Add [web|snmp|telnet]
Parameters:
: entry index (1-16)
: Start IP address (a.b.c.d)
: End IP address (a.b.c.d)
web : WEB/HTTPS interface
snmp : SNMP interface
telnet : TELNET/SSH interface
(default: Show configured and current mode)
Example:
Add access management list from 192.168.0.1 to 192.168.0.200 via web interface.
SWITCH/>security switch access add 1 192.168.0.1 192.168.0.200 web
Security Switch Access IPv6 Add
Description:
Add access management IPv6 entry.
Syntax:
Security Switch Access Ipv6 Add [web|snmp|telnet]
Parameters:
access_id> : entry index (1-16)
: Start IPv6 address.