Interlogix GE-DSSG-244-POE User Manual - Manual (Page 225)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
223
MAC Address Table Status
Dynamic MAC Table
Entries in the MAC Table are shown on this page. The MAC Table contains up to 8192 entries, and is sorted first by VLAN ID, then
by MAC address. The MAC Address Table screen is shown
Figure 4-13-3 .
Figure 4-13-3 MAC Address Table Status
Navigating the MAC Table
Each page shows up to 999 entries from the MAC table, default being 20, selected through the "entries per page" input field.
When first visited, the web page will show the first 20 entries from the beginning of the MAC Table. The first displayed will be the
one with the lowest VLAN ID and the lowest MAC address found in the MAC Table.
The "Start from MAC address" and "VLAN" input fields allow the user to select the starting point in the MAC Table. Clicking the
“Refresh” button will update the displayed table starting from that or the closest next MAC Table match.
In addition, the two input fields will - upon a “Refresh” button click - assume the value of the first displayed entry, allowing for
continuous refresh with the same start address.
The “ >> ” will use the last entry of the currently displayed VLAN/MAC address pairs as a basis for the next lookup. When the end
is reached the text "no more entries" is shown in the displayed table. Use the “ |<< ” button to start over.
The page includes the following fields:
Object Description
• Query by: The query of the MAC addresses entry. The following query types are supported:
Interface
: Query of the MAC addresses entry by interface.
VLAN : Query of the MAC addresses entry by VLAN.
MAC Address : Query of the MAC addresses entry by MAC address.
•
Type Indicates whether the entry is a static or dynamic entry.
•
VLAN The VLAN ID of the entry.
•
MAC address The MAC address of the entry.
•
Port Members The ports that are members of the entry.