beautypg.com

Lldp, Link layer discovery protocol, Lldp configuration – Interlogix GE-DSSG-244-POE User Manual User Manual

Page 229

background image

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual

227

LLDP

Link Layer Discovery Protocol

Link Layer Discovery Protocol (LLDP)

is used to discover basic information about neighboring devices on the local broadcast

domain. LLDP is a Layer 2 protocol that uses periodic broadcasts to advertise information about the sending device. Advertised
information is represented in Type Length Value (TLV) format according to the IEEE 802.1ab standard, and can include details
such as device identification, capabilities and configuration settings. LLDP also defines how to store and maintain information
gathered about the neighboring network nodes it discovers.

Link Layer Discovery Protocol - Media Endpoint Discovery (LLDP-MED)

is an extension of LLDP intended for managing

endpoint devices such as Voice over IP phones and network switches. The LLDP-MED TLVs advertise information such as network
policy, power, inventory, and device location details. LLDP and LLDP-MED information can be used by SNMP applications to
simplify troubleshooting, enhance network management, and maintain an accurate network topology.

LLDP Configuration

This page allows the user to inspect and configure the current LLDP port settings. The LLDP Configuration screen is shown

Figure

4-14-1

.

Figure 4-14-1

LLDP Configuration page screenshot

This manual is related to the following products: