Interlogix GE-DSSG-244-POE User Manual - Manual (Page 372)

User’s Manual of NS3601-24P/4S Series
370
SWITCH/>mirror sid 2
Mirror Mode
Description:
Set or show the mirror mode.
Syntax:
Mirror Mode [] [enable|disable|rx|tx]
Parameters:
: Port list or 'all', default: All ports
enable : Enable Rx and Tx mirroring
disable : Disable Mirroring
rx : Enable Rx mirroring
tx : Enable Tx mirroring
(default: Show mirror mode)
Default Setting:
disable
Example:
Enable the mirror mode for port 1-4.
SWITCH/>mirror mode 1-4 enable
Configuration Command
Configuration Save
Description:
Save configuration to TFTP server.
Syntax:
Config Save
Parameters:
: TFTP server IP address (a.b.c.d)
: Configuration file name
Configuration Load
Description:
Load configuration from TFTP server.
Syntax:
Config Load [check]
Parameters:
: TFTP server IP address (a.b.c.d)
: Configuration file name
check : Check configuration file only, default: Check and apply file