Mac flush, Vlan configuration command, Vlan configuration – Interlogix GE-DSSG-244-POE User Manual User Manual
Page 287: Vlav pvid

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
285
MAC Flush
Description:
Flush all learned entries.
Syntax:
MAC Flush
VLAN Configuration Command
VLAN Configuration
Description:
Show VLAN configuration.
Syntax:
VLAN Configuration [
Parameters:
: Port list or 'all',
(default: All ports)
Example:
Show VLAN status of port1
SWITCH/>vlan configuration 1
VLAN Configuration:
===================
Mode : IEEE 802.1Q
Port PVID IngrFilter FrameType LinkType Q-in-Q Mode Eth type
---- ---- ---------- ---------- -------- ----------- --------
1 1 Disabled All UnTag Disable N/A
VID Ports
---- -----
1 1-24
VLAV PVID
Description:
Set or show the port VLAN ID.
Syntax:
VLAN PVID [
Parameters:
: Port list or 'all', default: All ports
: Port VLAN ID (1-4095) or 'none',
(default: Show port VLAN ID)
Default Setting:
1
Example:
Set PVID2 for port20
SWITCH/>vlan pvid 20 2