Security network ip source guard status, Security network arp inspection configuration, Security network arp inspection mode – Interlogix GE-DSSG-244-POE User Manual User Manual
Page 333

User’s Manual of NS3601-24P/4S Series
331
: Port list or 'all', default: All ports
add
: Add new port IP source guard static entry
delete
: Delete existing port IP source guard static entry
: VLAN ID (1-4095)
: IP address (a.b.c.d), IP address allowed for doing ARP request
: IP mask (a.b.c.d), IP mask for allowed IP address
Example:
Add IP source guard static entry.
SWITCH/>security network ip source guard entry 1 add 1 192.168.0.20 255.255.255.0
Security Network IP Source Guard Status
Description:
Show IP source guard static and dynamic entries.
Syntax:
Security Network IP Source Guard Status [
Parameters:
: Port list or 'all', default: All ports
Example:
Show IP source guard static and dynamic entries.
SWITCH/>security network ip source guard status
Security Network ARP Inspection Configuration
Description:
Show ARP inspection configuration.
Syntax:
Security Network ARP Inspection Configuration
Example:
Show ARP inspection configuration.
SWITCH/>security network arp inspection configuration
Security Network ARP Inspection Mode
Description:
Set or show ARP inspection mode.
Syntax:
Security Network ARP Inspection Mode [enable|disable]
Parameters:
enable
: Enable ARP Inspection
disable
: Disable ARP Inspection
Default Setting:
disable
Example:
Enable ARP inspection mode
SWITCH/>security network arp inspection mode enable