Interlogix GE-DSSG-244-POE User Manual - Manual (Page 345)

User’s Manual of NS3601-24P/4S Series
343
Example:
Eisable STP restricted TCN on port1
SWITCH/>stp port restrictedtcn 1 enable
STP Port bpduGuard
Description:
Set or show the bpduGuard port parameter.
Syntax:
STP Port bpduGuard [] [enable|disable]
Parameters:
: Port list or 'all', default: All ports
enable : Enable port BPDU Guard
disable : Disable port BPDU Guard
Default:
disable
Example:
Eisable BPDU guard on port1
SWITCH/>stp port bpduguard 1 enable
STP Port Statistic
Description:
Show STP port statistics.
Syntax:
STP Port Statistics []
Parameters:
: Port list or 'all', default: All ports
Example:
Show STP port statistics.
SWITCH/>stp port statistics
Port Rx MSTP Tx MSTP Rx RSTP Tx RSTP Rx STP Tx STP Rx TCN Tx TCN Rx Ill. Rx Unk.
----- -------- -------- -------- -------- ------- ------- ------- ------- ------- -------
14 0 579 0 0 0 0 0 0 0 0
STP Port Mcheck
Description:
Set the STP mCheck (Migration Check) variable for ports.
Syntax:
STP Port Mcheck []
Parameters:
: Port list or 'all', default: All ports
Example:
Set the STP mCheck (Migration Check) variable for port 1.
SWITCH/>stp port mcheck 1