Interlogix GE-DSSG-244-POE User Manual - Manual (Page 91)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
89
same Key value can participate in the same aggregation group, while ports with
different keys cannot.
The default setting is “Auto”
•
Role
The Role shows the LACP activity status. The Active will transmit LACP packets
each second, while Passive will wait for a LACP packet from a partner (speak if
spoken to).
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
LACP System Status
This page provides a status overview for all LACP instances. The LACP Status page display the current LACP aggregation Groups
and LACP Port status . The LACP System Status screen is shown
Figure 4-5-5.
Figure 4-5-5 LACP System Status page screenshot
The page includes the following fields:
Object Description
•
Aggr ID
The Aggregation ID associated with this aggregation instance.
For LLAG the id is shown as 'isid:aggr-id' and for GLAGs as 'aggr-id'
•
Partner System ID
The system ID (MAC address) of the aggregation partner.
•
Partner Key
The Key that the partner has assigned to this aggregation ID.
•
Last changed The time since this aggregation changed.
•
Local Ports Shows which ports are a part of this aggregation for this switch/stack.
The format is: "Switch ID:Port".
Buttons
: Click to refresh the page immediately.
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
LACP Port Status
This page provides a status overview for LACP status for all ports. The LACP Port Status screen is shown Figure 4-5-6 .