Interlogix GE-DSSG-244-POE User Manual - Manual (Page 278)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
276
Example:
SWITCH/>ip ipv6 ping 2001::0002
PING6 server 2001::2
68 bytes from 2001::2: icmp_seq=0, time=0ms
68 bytes from 2001::2: icmp_seq=1, time=0ms
68 bytes from 2001::2: icmp_seq=2, time=0ms
68 bytes from 2001::2: icmp_seq=3, time=0ms
68 bytes from 2001::2: icmp_seq=4, time=0ms
Sent 5 packets, received 5 OK, 0 bad
IP NTP Configuration
Description:
Show NTP configuration.
Syntax:
IP NTP Configuration
Default Setting:
IP NTP Configuration:
=====================
NTP Mode : Disabled
Idx Server IP host address (a.b.c.d) or a host name string
--- ------------------------------------------------------
1 pool.ntp.org
2 europe.pool.ntp.org
3 north-america.pool.ntp.org
4 asia.pool.ntp.org
5 oceania.pool.ntp.org
IP NTP Mode
Description:
Set or show the NTP mode.
Syntax:
IP NTP Mode [enable|disable]
Parameters:
enable : Enable NTP mode
disable : Disable NTP mode
(default: Show NTP mode)
Default Setting:
disable
Example:
Enable NTP mode:
SWITCH/>ip ntp mode enable
IP NTP Server Add
Description:
Add NTP server entry.
Syntax: