Interlogix GE-DSSG-244-POE User Manual - Manual (Page 150)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
148
Set up VLAN Tag Priority Mapping
Set up the traffic class mapping to the User Priority value (3 bits) when receiving VLAN tagged packets.
The Set up VLAN Tag Priority Mapping screen is shown
Figure 4-9-6 .
Figure 4-9-6 Set up VLAN Tag Priority Mapping page screenshot
The page includes the following fields:
Object Description
•
QCL ID Select the QCL ID to which this QCE applies.
•
VLAN Priority Class Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
Buttons
: Click to cancel the wizard.
: Click to go back to the previous wizard step.
: Click to continue the wizard.
The QCL configuration wizard is finished, and the new configuration is ready for use.