Interlogix GE-DSSG-244-POE User Manual - Manual (Page 172)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
170
Figure 4-10-4 ACL Ports Configuration page screenshot
The page includes the following fields:
Object Description
•
Port
The logical port for the settings contained in the same row.
•
Policy ID Select the policy to apply to this port. The allowed values are 1 through 8. The
default value is 1.
•
Action Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default
value is "Permit".
•
Rate Limiter ID Select which rate limiter to apply to this port. The allowed values are Disabled
or the values 1 through 15. The default value is "Disabled".
•
Port Copy Select which port frames are copied to. The allowed values are Disabled or a
specific port number. The default value is "Disabled".
• Logging Specify the logging operation of this port. The allowed values are:
Enabled
: Frames received on the port are stored in the System Log.
Disabled : Frames received on the port are not logged.
The default value is "Disabled".