Interlogix GE-DSSG-244-POE User Manual - Manual (Page 327)

User’s Manual of NS3601-24P/4S Series
325
(default : Shows the combined status)
Example:
Show ACL status.
SWITCH/>security network acl status
Security Network DHCP Relay Configuration
Description:
Show DHCP relay configuration.
Syntax:
Security Network DHCP Relay Configuration
Example:
Show DHCP relay configuration.
SWITCH/>security network dhcp relay configuration
DHCP Relay Configuration:
=========================
DHCP Relay Mode : Disabled
DHCP Relay Server : NULL
DHCP Relay Information Mode : Disabled
DHCP Relay Information Policy : replace
Security Network DHCP Relay Mode
Description:
Set or show the DHCP relay mode.
Syntax:
Security Network DHCP Relay Mode [enable|disable]
Parameters:
enable : Enable DHCP relaly mode.
When enable DHCP relay mode operation, the agent forward and to transfer DHCP messages between the
clients and the server when they are not on the same subnet domain. And the DHCP broadcast message won't
flood for security considered.
disable : Disable DHCP relaly mode
(default: Show flow DHCP relaly mode)
Default Setting:
disable
Example:
Enable DHCP relay mode
SWITCH/>security network dhcp relay mode enable
Security Network DHCP Relay Server
Description:
Show or set DHCP relay server.
Syntax:
Security Network DHCP Relay Server []
Parameters: