Interlogix GE-DSSG-244-POE User Manual - Manual (Page 358)

User’s Manual of NS3601-24P/4S Series
356
Show LLDP Statistics of port 1
SWITCH/>lldp statistics 1
LLDP global counters
Neighbor entries was last changed at - (323592 sec. ago).
Total Neighbors Entries Added 0.
Total Neighbors Entries Deleted 0.
Total Neighbors Entries Dropped 0.
Total Neighbors Entries Aged Out 0.
LLDP local counters
Rx Tx Rx Rx Rx TLV Rx TLV Rx TLV
Port Frames Frames Errors Discards Errors Unknown Organz. Aged
---- ------ ------ ------ -------- ------ ------- ------- -----
1 0 0 0 0 0 0 0 0
LLDP Info
Description:
Show LLDP neighbor device information.
Syntax:
LLDP Info []
Parameters:
: Port list or 'all', default: All ports
LLDP CDP Aware
Description:
Set or show if discovery information from received CDP ( Cisco Discovery Protocol ) frames is added to the LLDP
neighbor table.
Syntax:
LLDP cdp_aware [] [enable|disable]
Parameters:
: Port list or 'all', default: All ports
enable : Enable CDP awareness (CDP discovery information is added to the LLDP neighbor table)
disable : Disable CDP awareness
(default: Show CDP awareness configuration)
Default Setting:
disable
Example:
Enable CDP aware finction for port1~4
SWITCH/>lldp cdp_aware 1-4 enable
LLDPMED Command
LLDPMED Configuration
Description:
Show LLDP-MED configuration.
Syntax:
LLDPMED Configuration []