Interlogix GE-DSSG-244-POE User Manual - Manual (Page 222)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
220
The page includes the following fields:
Object Description
• Mode of ARP
Inspection
Configuration
Enable the Global ARP Inspection or disable the Global ARP Inspection.
• Port Mode
Configuration
ARP Inspection is only enabled on this given port , when both Global Mode
and Port Mode on a given port are enabled.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
ARP Inspection Static Table
This page provides Static ARP Inspection Table. The Static ARP Inspection Table screen is shown Figure 4-12-13 .
Figure 4-12-13 Static ARP Inspection Table screen page screenshot
The page includes the following fields:
Object Description
• Delete Check to delete the entry. It will be deleted during the next save.
• Port The logical port for the settings.
• VLAN ID The VLAN ID for the settings.
• MAC Address Allowed Source MAC address in ARP request packets.
• IP Address Allowed Source IP address in ARP request packets.