Interlogix GE-DSSG-244-POE User Manual User Manual
Page 195
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
193
RADIUS Authentication Servers
Object
Description
• #
The RADIUS server number. Click to navigate to detailed statistics for this server.
• IP Address
The IP address and UDP port number (in
this server.
• State
The current state of the server. This field takes one of the following values:
Disabled
: The server is disabled.
Not Ready
: The server is enabled, but IP communication is not yet up and
running.
Ready
: The server is enabled, IP communication is up and running, and the
RADIUS module is ready to accept access attempts.
Dead (X seconds left)
: Access attempts were made to this server, but it did not
reply within the configured timeout. The server has temporarily been disabled,
but will get re-enabled when the dead-time expires. The number of seconds left
before this occurs is displayed in parentheses. This state is only reachable when
more than one server is enabled.
RADIUS Accounting Servers
Object
Description
• #
The RADIUS server number. Click to navigate to detailed statistics for this server.
• IP Address
The IP address and UDP port number (in
this server.
• State
The current state of the server. This field takes one of the following values:
Disabled
: The server is disabled.
Not Ready
: The server is enabled, but IP communication is not yet up and
running.
Ready
: The server is enabled, IP communication is up and running, and the
RADIUS module is ready to accept accounting attempts.
Dead (X seconds left): Accounting attempts were made to this server, but it did
not reply within the configured timeout. The server has temporarily been
disabled, but will get re-enabled when the dead-time expires. The number of
seconds left before this occurs is displayed in parentheses. This state is only
reachable when more than one server is enabled.
Buttons
Auto-refresh
: Check this box to enable an automatic refresh of the page at regular intervals.
:
Click to refresh the page immediately.