Interlogix GE-DSSG-244-POE User Manual - Manual (Page 166)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
164
: Moves the ACE down the list.
: Deletes the ACE.
: The lowest plus sign adds a new entry at the bottom of the ACE listings.
Buttons
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh occurs at regular intervals.
: Click to refresh the page; any changes made locally will be undone.
: Click to clear the counters.
: Click to remove all ACEs.
ACE Configuration
Configure an ACE (Access Control Entry) on this page.
An ACE consists of several parameters. These parameters vary according to the frame type that you select. First select the ingress
port for the ACE, and then select the frame type. Different parameter options are displayed depending on the frame type that you
selected. The ACE Configuration screen is shown
Figure 4-10-3.
Figure 4-10-3 ACE Configuration page screenshot
The page includes the following fields:
Object Description
•
Ingress Port
Select the ingress port for which this ACE applies.
Any
: The ACE applies to any port.
Port n : The ACE applies to this port number, where n is the number of the switch port.
Policy n : The ACE applies to this policy number, where n can range from 1 through 8.
• Switch Select the Switch for this ACE applies.
Any
: The ACE applies to any Switch.
Switch x : The ACE applie to one specific Switch that stack together.