Snmpv3 configuration, Snmpv3 communities configuration, Snmp-based network management – Interlogix GE-DSSG-244-POE User Manual User Manual
Page 73: Port isolation configuration, Port limit control, Ip command

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
71
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
SNMPv3 Configuration
SNMPv3 Communities Configuration
Configure SNMPv3 communities table on this page. The entry index key is Community. The SNMPv3 Communities Configuration
screen is shown in
Figure 4-3-4
.
Figure 4-3-4
SNMPv3 Communities Configuration page screenshot
The page includes the following fields:
Object
Description
•
Delete
Check to delete the entry. It will be deleted during the next save.
•
Community
Indicates the community access string to permit access to SNMPv3 agent. The
allowed string length is 1 to 32, and the allowed content is the ASCII characters
from 33 to 126.
•
Source IP
Indicates the SNMP access source address.
•
Source Mask
Indicates the SNMP access source address mask.
Buttons
: Click to add a new community entry.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.