Interlogix GE-DSSG-244-POE User Manual - Manual (Page 261)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
259
Figure 4-17-10 Port State Overview page screenshot
Stack Example
Stacking function is convenient for administrator to manage multiple switches by single IP. Basically, you got to have min. 2 units.
The IFS Switch supports auto stack configuration. Once the stack cable is connect to the stack port of each IFS switch and power on
them, the stack is builded automatically and the Switch ID is automatically assigned to the switch. It is also easy to add or delete
stackable switch to the stack without service interruption. The key point of the Stack management are:
„ Identify the MASTER SWITCH
„ Assign / re-assing Switch ID for each management purpose
Step 1:
linking the switches by CB-STX50 stack cable.
Step 2: Check the Master LED of each IFS switch to find out the Master Switch that is elected automatically by the stack operation.
Step 3: Use the Web browser such as IE 7.0 to login the Master Switch, the default IP address is 192.168.0.100. Or you can use the
IFS Smart Discovery Utility to find out the IP address of the stack group.
Figure 4-17-11 Use IFS Smart Discovery Utility to display the IP address of stack master
Step 4:
Choose “Stack \ Stack Configuration” from menu tree. You can see the Stack had established automaticatlly. As the below
screen appears:
1. The Switch ID is automatically assigned to the switches
2. All switches with same Priority value “3”.
3. The one can’t be delete is the Stack master.
MASTER
LED
SWITCH ID
Port Link status Stack Port Link status