Interlogix GE-DSSG-244-POE User Manual - Manual (Page 280)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
278
Parameters:
: Port list or 'all', default: All ports
up : Show ports, which are up
down : Show ports, which are down
(default: Show all ports)
Example:
Display port1~4 status
SWITCH/>port configuration 1-4
Port Configuration:
===================
Port State Mode Flow Control MaxFrame Power Excessive Link
---- -------- ------ ------------ -------- -------- --------- ----
1 Enabled Auto Disabled 9600 Enabled Discard Down
2 Enabled Auto Disabled 9600 Enabled Discard Down
3 Enabled Auto Disabled 9600 Enabled Discard Down
4 Enabled Auto Disabled 9600 Enabled Discard Down
Port Mode
Description:
Set or show the port speed and duplex mode.
Syntax:
Port Mode [] [10hdx|10fdx|100hdx|100fdx|1000fdx|auto]
Parameters:
: Port list or 'all', default: All ports
10hdx : 10 Mbps, half duplex
10fdx : 10 Mbps, full duplex
100hdx : 100 Mbps, half duplex
100fdx : 100 Mbps, full duplex
1000fdx : 1 Gbps, full duplex
auto : Auto negotiation of speed and duplex
(default: Show configured and current mode)
Default Setting:
Auto
Example:
Set 10Mbps (half duplex) speed for port1
SWITCH/>port mode 1 10hdx
Port Flow Control
Description:
Set or show the port flow control mode.
Syntax:
Port Flow Control [] [enable|disable]
Parameters:
: Port list or 'all', default: All ports
enable : Enable flow control
disable : Disable flow control
(default: Show flow control mode)
Default Setting: