Interlogix GE-DSSG-244-POE User Manual - Manual (Page 367)

User’s Manual of NS3601-24P/4S Series
365
QoS QCL Port
Description:
Set or show the port QCL ID.
Syntax:
QoS QCL Port [] []
Parameters:
: Port list or 'all', default: All ports
: QCL ID
Default Setting:
1
Example:
Set QCL ID5 for port10
SWITCH/>qos qcl port 10 5
QoS QCL Add
Description:
Add or modify QoS Control Entry (QCE).
If the QCE ID parameter is specified and an entry with this QCE ID already exists, the QCE will be modified.
Otherwise, a new QCE will be added. If the QCE ID is not specified, the next available QCE ID will be used.
If the next QCE ID parameter is specified, the QCE will be placed before this QCE in the list. If the next
QCE ID is not specified, the QCE will be placed last in the list.
Syntax:
QoS QCL Add [] [] [ (etype ) | (vid ) | (port ) | (dscp )
|(tos ) | (tag_prio )
Parameters:
: QCL ID
: QCE ID (1-24)
: Next QCE ID (1-24)
etype : Ethernet Type keyword
: Ethernet Type
vid : VLAN ID keyword
: VLAN ID (1-4095)
port : UDP/TCP port keyword
: Source or destination UDP/TCP port (0-65535)
dscp : IP DSCP keyword
: IP DSCP (0-63)
tos : IP ToS keyword
: IP ToS list (0-7)
tag_prio : VLAN tag priority keyword
: VLAN tag priority list (0-7)
: Traffic class low/normal/medium/high or 1/2/3/4
QoS QCL Delete
Description:
Delete QCE.
Syntax:
QoS QCL Delete
Parameters:
: QCL ID
: QCE ID (1-24)